Help

¡Bienvenido al foro de la comunidad!

Si tienes problemas de software, este es tu sitio. Construyamos entre todos un lugar mejor, proporcionando experiencias, información de uso y tips. Si tienes alguna pregunta, procura dar información detallada sobre tu sistema.

Si tienes problemas de hardware, tramita la GARANTÍA AQUÍ, ya que nuestros técnicos no suelen revisar el foro por estar trabajando en reparaciones.

USB-C DisplayPort Alt Mode stops working intermittently - EC firmware deadlock (EVO15-A8)

Closed
Avatar
Nespolinux

The question has been closed for reason: Closed due to inactive post for over 30 days

on 04/16/2026 17:46:01

The USB-C DisplayPort Alt Mode intermittently stops working on my EVO15-A8 (AMD 8845HS, BIOS N.1.14GOS07, EC 2.12.00). When the issue occurs, the EC/UCSI firmware refuses to negotiate DP Alt Mode -- the partner device is detected but the alt mode is never activated (active = no). USB data continues to work normally, only video output is affected.


The issue persists across reboots, cold boots, BIOS defaults reset, Live USB boot, different cables, different USB-C ports, and even a different monitor connected directly (no KVM). The only recovery method found is reflashing the BIOS+EC firmware via EFI shell, which is not an acceptable workaround for a recurring issue.


Full technical analysis with kernel logs, 18 failed remediation attempts, sysfs state dumps, and a detailed root cause analysis is available here: https://gist.github.com/gnespolino/81abd597153fd19aa2a039f66b8359a3


I would like to request either an EC firmware fix or at minimum an accessible EC reset mechanism (e.g. a BIOS menu option) so that a full firmware reflash is not required every time this happens.

Thank you

EVO15-A8
Avatar
Discard
1 Answer
0
Avatar
Nespolinux
Best Answer

Hello Giuseppe, thank you for your excellent work; we're discussing this with the factory.
Please give us some time

Avatar
Discard